Repairs To Upvc Windows: 11 Things You're Forgetting To Do

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any shards fall onto the cloth instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from entering your property until a professional is able to fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is significant, you may need to consider security screens that has a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues such as sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and verify the fitting. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Most often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. You'll first need to close the window and then perform an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you're waking up to wet floors and Upvc Window Repairs mouldy walls each time it rains it's crucial to take action. Windows that leak water do can not only cause degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens with the breeze. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Like any mechanical part, hinges can wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do with someone else to help hold the frame in place.

Make sure that the uPVC hinges are closed and open in the proper direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation in the factory. This can often be resolved by sending us a photograph via our website and we will be happy to give you advice.

It is also important to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window open and uPVC window repairs close more easily. It also decreases the chance of windows getting stuck and stop corrosion. The ideal time to perform this every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your upvc window repairs window.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again due to wear and tear may become displaced, which causes an opening to appear where the sash joins the frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to have them re-aligned or replaced. The interlock may be disaligned. It is located on the hinge's side, and could require to be cleaned. In some cases, it may be necessary to replace them.

The next most common reason for draughts is window seals. They can become worn down or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be cheaper to replace them rather than repair them. If you are experiencing issues with your window made of upvc, it's best to consult a professional as soon as you can.