How To Get More Results From Your Window Repair

Window Repairs

Window repairs can save homeowners money and make their homes warm. Window replacement is often required in the event of severe damage such as broken glass, or a shattered window frame.

Many other issues can be solved to prolong the longevity of windows. Some common issues include:

Cracked or broken Panes

If it's an unintentional rock thrown by your lawnmower or a tree branch that has been blown by high winds, damaged window glass isn't just ugly, but it can also result in higher electric bills since the broken pieces let cold air into your home. It's relatively easy to repair windows with broken panes.

Start by carefully removing the glass with gloves and safety glasses. You may need use a utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the frame's wood using a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is water-proof to the frame's edges. This will prevent water from leaking into the frame through the crack and causing further damage.

A bad crack in double-paned glass can compromise the gas between the panes, rendering your windows less efficient in insulating. If the crack is severe enough that it threatens the integrity of the window, or if the inner pane is missing it is possible to consult a professional.

Cracks caused by thermal stress can occur when there is a significant temperature difference inside and outside your home. This causes the glass to expand and shrink. If this happens across two windows it's recommended to replace the window instead of trying to repair it.

For cracked windows that aren't yet ready to be replaced Clear tape can do a decent job of stabilizing the crack and keeping out bugs and cold air. You can cut a nylon stocking large enough to completely cover the crack and glue it with duct tape. This isn't a long-term solution, but it works well in a pinch and keeps cold air and insects from entering your home. If your windows are older and you're beginning to see cracks in the glass, it's an excellent idea to talk with your local window company regarding whether replacing the entire window could be a better option for you.

Rotten Wood

Wood rot is a common problem with windows. It can ruin a house's appearance and pose a safety hazard. It is possible to fix damaged wood. First, you need to ensure that the cause of the rot has been taken care of. Check for roof leaks and other areas that water may get into the wood.

The next step is to take out any rotten parts of the upvc window repairs near me frame. This can be done with a rasp, chisel or timber claw hammer. After removing the decayed wood, you'll have to replace it with new wood. It is recommended to use pre-treated wood for this project as it will be resistant to rot. If you are not able to replace the rotted timber you can apply filler and wood hardener to strengthen the damaged area. The majority of hardware stores carry this type of product. To achieve the best results, follow the instructions on the label.

Once you have replaced the decayed areas of the windowsill, it is crucial to safeguard the newly repaired area. You can do this by applying a water-resistant wood sealant. A product like Sikkens is a great choice for this task.

Use a two-part epoxy in order to protect the wood against further damage. It is easy to apply and leaves a beautiful finish. However, it is very important to adhere to the instructions for application on the label. Once the epoxy filler has dried, you can smooth the wood's surface. It is best to begin with a rough piece of sandpaper, and then progress to a smoother one.

You don't want to expose the damaged part to further moisture. It is a good idea so, to protect the surface you have repaired with an oil-based prime that will protect it from water. Then, you can apply the waterproof wood sealant.

The W won't let you open

There are a variety of reasons windows don't open. The house might have shifted or the wooden frames may have warped in rainy weather. Somebody may have nailed them shut for security. However, with a little patience and the right tools, most windows that are stuck can be opened.

One of the main reasons for timber windows that isn't opening is the accumulation of debris or gunk on its moving parts. Dirt and grime build up on the sliding tracks, hinges, and locks over time, notes Acme Glass. Metal hardware can also rust when it comes in contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease will help prevent the oxidation process and ensure that your window is operating correctly.

The pulleys that raise or lower the window may become loose, or even break. These parts can lose tension and cause obstruction if they are located at least two floors above the ground.

If you're having difficulty opening windows try using a pry bar to gently force the window open a little at a time. Place a block of wood on the frame to give your pry bar more leverage, and be careful not to damage the window or wood. You can also try running a hair dryer along the edges of the frame for several minutes to warm the wood and help it move more easily.

A faulty spring can also be the cause of windows that don't lift or lower. Depending on who manufactured your windows, you will need to refer to your owner's manual for further instructions.

If you have tried cleaning the moving parts of your windows and lubricating them but they're still not opening it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home go from being functional to inoperable. If a window isn't properly shut can make your home vulnerable to water damage and burglary. Contact our team for more information on our windows replacement and services today!